Aquarium and Pond Care with EcoBio-Block

Even the most novice aquarium hobbyist is likely to understand the importance of routine water changes in keeping an aquarium clean and healthy. Water changes are not only essential for keeping algae growth and aquarium fish diseases at bay, but they are also important in maintaining stable water chemistry. If the water chemistry in your tank changes drastically, your fish could become stressed or even die as a result. In order to avoid such a severe consequence it is wise to understand not only the need for regular water changes but also the proper way to go about performing them.

Why Water Changes are Necessary

Like all living creatures, aquarium fish produce waste and this waste typically sinks to the bottom of the tank where it accumulates with other forms of organic debris like decomposing plant matter and uneaten fish food. Over time, this debris begins to break down and produces ammonia, a substance toxic to fish. Though the beneficial bacteria in an aquarium help to convert ammonia into less harmful substances, these bacteria can only do so much. Water changes are necessary to keep toxins in the tank under control – if you never performed a water change, the chemicals would simply build up in the tank water, making it unsuitable for aquarium fish. Water changes are also needed to replace the water lost through evaporation.

Proper Water Changing Procedure

gravel vacuuming

Though the size and frequency of necessary aquarium water changes may vary slightly according to the species of fish in the tank, most tanks require a weekly water change of 10% to 15% of the tank volume. These regular water changes should be accompanied by a larger 25% water change once a month. To perform a water change most effectively, use a gravel vacuum to siphon the substrate in your tank – this method will remove built-up detritus from the bottom of your tank along with the dirty tank water. If you were to simply scoop out a few gallons of water from the top of the tank you might succeed in diluting some of the toxins present in the water but the build-up in the substrate of the tank would continue to produce ammonia which would eventually lead to a decline in water quality.

Once you have removed the desired amount of water from the tank, the next step is to replace it with clean water. For freshwater tanks, regular tap water can be used as long as it has been dechlorinated. Aquarium hobbyists use a variety of methods to remove chlorine from tap water but the easiest and most effective method is to use a liquid water conditioner. Water conditioners work instantly to remove chlorine and chloramine from tap water, thus making it safe for aquarium fish. If you have a saltwater tank, your water changes may not be so quick or easy. You must mix the saltwater at least 24 hours before you perform the water change and it is best to add the water to the tank through a sump system rather than pouring it directly into the tank.

Tips for Water Changes

To make your water changes easier, select a gravel vacuum proportional to the size of your tank. If you have a small tank, a simple tube-shaped vacuum should be sufficient. For larger tanks, however, gravel vacuums that have wider heads are helpful. Though you cannot get away without ever performing a water change if you want your tank to stay clean and healthy, there are a few things you can do to reduce the frequency of necessary water changes. Adding an EcoBio-Stone to your tank is an easy way to keep your tank water fresh and clean and reducing maintenance needs. EcoBio-Stones are made from natural zeorite and special cement, and they can be added directly to the tank where the beneficial bacteria with which the stone is infused will immediately get to work. These bacteria will establish a colony in your tank, working to maintain the nitrogen cycle so the water in your tank stays clean and the water quality remains high. If you can maintain high water quality in your tank, you will find that you need to perform water changes less often.

Measuring pH with a Meter

Water chemistry is a term used to describe the chemical and physical characteristics of tank water which can be measured using aquarium water test kits. Test kits are typically inexpensive and easy to use, making them an excellent tool for in-home use by aquarium hobbyists. These tests will help you to monitor the basic components of water chemistry – pH, water hardness and chemical content. While many species of freshwater fish are tolerant of a variety of tank conditions, it is always a good idea to keep an eye on the water chemistry in your tank. If the pH spikes or the water becomes too hard, your fish could become stressed and, as a result, could fall ill or even die. By learning the basics of water chemistry you can prevent such a disaster from happening in your tank.

Main Components of Water Chemistry

Perhaps the most important component of water chemistry is pH. PH is a measure of how acidic or alkaline the water in your tank is and it is measured on a scale from 0 to 14. A pH of 7.0 is considered neutral while anything above is alkaline and anything below is acidic. The recommended pH for a fish tank varies depending on the species of fish and the natural environment from which they come. Water hardness, or general hardness, is a measure of the concentration of dissolved ions in tank water. This hardness is measured in degrees – soft water typically measures between 0° and 3.36° degrees of general hardness (°GH) and hard water is between 6.78° and 10.08° GH. Another important aspect of water chemistry is buffering capacity – the ability of tank water to maintain a stable pH. When acids or bases are added to the tank, the buffering capacity of the water is what keeps the pH from spiking or dropping as a result of these additions. All aquariums are likely to contain trace amounts of chemicals and toxins such as ammonia, nitrite and nitrate. Keeping an eye on the chemical levels in your tank is a good way to prevent ammonia poisoning and toxicity.

Testing Water Quality

Basic aquarium water test kits are available online and in pet stores, usually for $20 or less. These kits are easy to use and generally work in one of two ways. Some kits include test strips that you simply dip into a cup of tank water while others involve collecting individual water samples and adding drops of test solution. Once you have taken the samples, all you need to do is compare the color of the sample to the color chart included with the test kit in order to determine the measurement of whatever it is you are testing for. It is wise to perform water tests on a weekly basis and you should record the measurements in a journal in order to keep track of any changes.

Tips for Maintaining High Water Quality

The easiest and most effective way to keep the water quality in your tank high is to perform weekly 10% to 20% water changes. These water changes will help to control the waste build-up in your tank and will also ensure that your water chemistry stays stable. Another simple way to keep the water in your tank clean and the water chemistry stable is to introduce an EcoBio-Stone. These stones are made from porous volcanic cement and are infused with unique beneficial bacteria. Once introduced into the tank, these bacteria will multiply to form a colony of nitrifying bacteria which will help to maintain the nitrogen cycle. Placing the EcoBio-Stone will greatly reduce your maintenance needs – the bacteria will do most of the work in helping to keep your tank water clear and the water quality high.

Filtration is the key to keeping your aquarium a clean and healthy environment for your fish. When it comes to choosing a filter, however, it is easy to become overwhelmed by the sheer volume of options available. Before selecting a filter for your aquarium you need to understand the basics of aquarium filtration which includes understanding the three types of filtration. Different types of filters offer different types of filtration and, unless you understand the basics, you will not be equipped to select the right piece of equipment for your tank.

Mechanical Filtration

The most basic, and perhaps the most important, type of aquarium filtration is mechanical filtration. Mechanical filtration simply involves the physical removal of solid waste products from tank water. Generally, solid waste takes the shape of uneaten fish food, decaying plant matter and organic waste like feces. Aquarium filters that offer mechanical filtration usually operate by sucking the aquarium water up through an intake tube. The water is then filtered through some kind of sponge and released back into the aquarium. As the water passes through the sponge, solid waste products become lodged in the pores and are thus removed from the aquarium water. This type of filtration is essential in the home aquarium because, as solid waste accumulates along the bottom of the tank, it breaks down in a process that produces ammonia. Ammonia is a substance toxic to fish and if the ammonia levels in your tank become too high, your fish could become stressed, fall ill or even die.

Chemical Filtration

Chemical filtration is often combined with mechanical filtration as a means of removing dissolved wastes in addition to solid wastes from aquarium water. This type of filtration helps to remove a variety of wastes including proteins, hormones and metabolic waste as well as organic acids and compounds. As the filter takes tank water up through the intake tube, it passes through the sponge along with some type of filter media which removes the dissolved wastes. The most common type of filter media is activated carbon. Most modern filters which incorporate chemical filtration utilize filter cartridges that combine the mechanical filtration of a sponge with the chemical filtration of activated carbon. In order to maximize the effectiveness of these filters, the filter cartridge must be replaced every three to four weeks.

Biological Filtration

The third type of filtration, biological filtration, does not necessarily require any special equipment. Biological filtration is a term used to describe the process by which nitrifying bacteria break down wastes in your tank, converting harmful toxins like ammonia into less harmful nitrates. While mechanical filters work to remove solid wastes, there is likely to still be some build-up in your substrate. As these substances decompose, ammonia is produced. The nitrifying bacteria in your tank work to convert ammonia into nitrites then into nitrates, a process called the Nitrogen Cycle. While some filters incorporate a Bio-wheel designed to provide beneficial bacteria a place to grow, the most common places these bacteria grow is in tank substrate and on in-tank surfaces.

Tips for Aquarium Filtration

Regardless what type of filter you choose for your aquarium, you will be required to perform some basic maintenance tasks. It is wise to rinse your filter once in a while to remove any build-up of slime algae. It is also necessary to replace your filter media every three to four weeks to ensure that your filter will keep your aquarium water clean. In addition to these simple maintenance tasks, you can increase the effectiveness of your aquarium filter by adding an EcoBio-Stone to your tank. EcoBio-Block products are composed of porous volcanic sand and infused with beneficial bacteria. Once introduced into your tank, these bacteria multiply to form a colony of nitrifying bacteria which will help your filter to convert harmful toxins like ammonia into less harmful nitrates. EcoBio-Stones are easy to use and they are a great way to help keep your aquarium water clean and clear.

Typical Aqurium Tank

There are several common misconceptions surrounding aquarium size. One of the most common mistakes a novice aquarium hobbyist can make is to think that a larger tank is more work to maintain than a smaller tank. In many cases, the opposite is true. When choosing the right size aquarium there are a variety of factors to consider including the level of maintenance you are willing to perform, the space you have available in your home and the types of fish you want to raise.

Tank Maintenance

If you set up your tank with the right equipment there should be relatively little maintenance involved, regardless of your tank size. Your aquarium filter will do most of the work in keeping your tank water clear by filtering out waste and toxic substances. Larger water volumes equate to a greater level of forgiveness for mistakes on the part of the aquarium hobbyist because higher water volumes dilute toxins better than small volumes. The water in smaller tanks must be changed more frequently than that in large tanks to prevent it from becoming too hard.

How to Choose the Right Size Aquarium Tank

The size and location of the space you have available in your home should be one of the major factors in considering the right size for your aquarium. You need to be able to place your tank in a low-traffic area out of direct sunlight in order to prevent accidents and excess algae growth. Before you shop for your tank, measure the space where you intend to install it and be sure you have a sturdy cabinet or stand large enough to accommodate the tank size you want. You should also keep in mind, when selecting a location for your tank, that you need to be able to access it easily in order to perform routine maintenance tasks.

Type of Fish

It may seem counterintuitive to select your aquarium fish before purchasing a tank, but doing so will help you to determine the right tank size. If you plan to fill your tank with small community fish like tetras and guppies you probably will not need anything larger than a 20- or 30- gallon tank. Larger fish, however, such as cichlids and many saltwater fish require upwards of 50 gallons of tank volume. When determining the proper size for your tank, consider the full-grown size of your fish – not the size at which you plan to purchase them. If you are just starting out, stick to the rule of purchasing one inch of fish per one gallon of tank capacity. This rule will help to prevent overcrowding in your tank.

Other Tips for Maintaining Your Tank

Choosing the right size tank for your fish is one of the simplest ways to ensure that they are able to enjoy a healthy environment. The larger the tank you select, the less you will have to worry about toxicity and overcrowding but not every hobbyist has room for a large tank. No matter what size tank you choose there are a few simple things you can do to keep it clean and healthy. Introducing an EcoBio-Stone, for example, is an easy way to boost the nitrogen cycle in your tank, ensuring that the water stays clean and clear. EcoBio-Stones are made from natural volcanic cement and infused with special beneficial bacteria. Once introduced into your tank, these bacteria will multiply and establish a colony of beneficial bacteria that will work to revitalize your tank water, remove odors and reduce the amount of necessary maintenance you have to perform.

Avoid overcrowding and keep your fish healthy

Being an aquarium owner is one of the most rewarding hobbies ever! There are so many different types of fish to choose from, and watching your fish with their striking colors swim about the tank is a pleasure you can enjoy every day.

Some aquarium owners are unaware of the need to prevent overcrowding in their fish tanks, and are unable to tell if their fish are ready for a larger tank.
A novice owner can commit this no-no easily. The fish that they purchased when first starting out in the aquarium hobby may have become too large for their original tank. Enthused about this new hobby, the newbie may have also added more fish than the size of the usual beginner 10-gallon tank can handle. No matter what the circumstances, it does not take long for an overcrowded tank to begin to show signs of trouble as the level of toxins in the water rise.

A high toxin load in your aquarium is definitely going to stress out your fish, and can even kill them if it is allowed to continue for too long. You can try to keep up with partial water changes, which can help the condition of the tank water, but that can be a lot of work.

The overcrowded aquarium requires much more oxygen than the aquarium that is properly stocked and well maintained. This means that the fish in a tank that is too small to house them properly are deprived of the oxygen they need.
If you are dealing with an overcrowded aquarium, then ammonia and nitrite levels should be monitored frequently.

Another aspect of overcrowding is the fact that any diseases or parasites your fish may have will affect every fish in the aquarium in a very short time. All fish have parasites and bacteria on the surface of their bodies. When fish are stressed, they are much more apt to fall victim to either or both.

It can be simple to take care of one or two fish that have developed some sort of fungus, or who are spotted with Ich. However, having a small aquarium full of sick fish is not a pleasant scenario. By the time you are able to get all of the fish out of the aquarium and into a safe place, well over half of them could be dead or dying.

You may think that a larger tank is out of your budget. Ask friends if they have or know of anyone with a spare aquarium in their garage. Watch the classified section of your daily newspaper for used tanks, or even better, look around the online classifieds for your area. You may be lucky enough to find the exact type and size of tank you need

Once you have located what you think would be a suitable tank for your fish, make sure that you have found the size that you need. Freshwater fish will generally need about a gallon of water for every inch. Saltwater fish need one square foot for every three inches, so do keep the proper figures in mind as you shop for a larger tank.

Your larger tank will be a lot of fun to accessorize, but why not make one of those accessories a highly functional one? Placing an EcoBio-Stone L in that new to you, larger aquarium will help to keep the water beautifully clear. This product also gets rid of any funky odors the tank water may have, and can really cut down on the frequency of water changes.