Aquarium and Pond Care with EcoBio-Block

Variety of aquarium filters

Many people are choosing to have aquariums with many different types of fish in them. Certainly, they are beautiful and relaxing to look at, but it takes some knowledge and work to ensure that your fish remain healthy and that your aquarium looks as good as you envision it will. One of the ways to ensure that it does is by choosing the best aquarium filter for your fish.

Even before deciding upon the filter, you need to decide what type of aquarium you will have. If this will be your first aquarium, it’s advisable that you start with a small aquarium first, as they are a little easier to maintain. Plus, you can always upgrade to a larger aquarium if the need and desire arise later.

Second, you need to carefully consider what filter will work best with your chosen aquarium. The filter is vital equipment, as it removes impurities from the water of your aquarium either via fine physical obstacles or via chemical processes. Choosing the right type of filter now can save you from hours of backbreaking maintenance work later on.

You should consider all three types of filters: biological, chemical, and mechanical.

Wet-dry filters actually employ all three types of filtration systems mentioned above, leading to less maintenance requirements than other types of filters. Wet-dry filters are more expensive, however, so they may not be the best choice for people who have an aquarium for the first time and/or are on a limited budget.

The three types of filters use different types of processes in order to eliminate the impurities in the water and to make the water cleaner and safer for your fish. Biological filters use bacteria to crack ammonia and nitrites.  Chemical filters use activated charcoal in order to eliminate unwanted dissolved wastes from the water. Mechanical filters use filtering particles and filter floss in order to remove impurities from the water.

If you choose to use a biological filter, it’s important to add the filter to the aquarium BEFORE you add the fish. You should also NOT add too many fish to the aquarium too soon, as the bacteria from the biological filter needs time to reduce the ammonia and nitrate levels. Too many fish in the water will cause the biological filter to work overtime, and the bacteria won’t be able to keep up with the increased demand, leading to high ammonia levels and the deaths of your fish.

You can help to make sure that there are enough bacteria in the water by using EcoBio-Block® products, which regularly adds nitrifying bacteria to new aquariums so that the water in your aquarium is safer and more beneficial for your fish. This will keep your water clear and healthy and reduce maintenance work.

One of the best choices of aquarium filters, especially for new and inexperienced aquarium owners, is an undergravel filter. This type of filter is inexpensive and totally keeps out debris from the aquarium. It also pulls water that is rich in oxygen through the gravel to help make the aquarium environment more livable for your fish.

One other type of filtration for you to consider is a sponge filter.  This filter is one that provides both mechanical and biological filtration. It has a large foam rubber (like a sponge) block that is connected to a lift tube or small power head. Water is drawn through the sponge to remove small particles from the water and to help grow bacteria that will keep your pond in great condition for your fish and plants.

Having your own aquarium tank can be a wonderful experience, as the beautiful fish can mesmerize you and your guests for hours. Maintaining the health of your aquarium does take some work, but by choosing the proper filter for your aquarium, you are well on your way to creating a hospitable and beneficial environment for your fish so that they can mesmerize you for hours on end.

You’ve spent a lot of money and time picking out the right fish for your aquarium and you think you’ve got it just right. Then you start losing some valuable fish. How does this happen and what can you do to prevent this tragedy?

There can be a lot of reasons why your fish are dying. Generally, it happens when a fish tank is new. It pays to buy an aquarium water test kit to determine how much ammonia, nitrites and nitrates are in the aquarium, and how high or low the pH is. These are the four most important tests for your tank.

In the nitrogen cycle of the fish tank, an important biological cycle, the fish give off nitrogenous wastes when they eliminate and these products break down into ammonia, which is very toxic to most fishes. In aquariums, this nitrogen product can build up into levels that are harmful to your fish. When you measure the ammonia level, it should be negligible.

The nitrogen cycle, is the process of getting rid of ammonia using nitrifying bacteria that convert the ammonia to nitrite and then to nitrate, which is not as hazardous. The cycle goes from ammonia to nitrite to nitrate. These bacteria are present everywhere and establish themselves eventually in your fish tank as soon as the ammonia builds up. It is a slow process, however, and you can lose fish in the meantime.

One way of improving the nitrogen status of your aquarium is to purchase an EcoBio-Block Products that contains the nitrifying bacteria within the block. You rinse the block and soak it in chlorine free water over night before placing it in your tank. Normally, in a few weeks or so, you can have your ammonia levels drop followed by drops in nitrite levels. You can safely put your fish in then and expect that they will survive.

The other thing is to take a couple of hardy and cheap fish and put them in your tank. Don’t overfeed the fish. More food means that more ammonia will build up. For freshwater fish, try some zebra danios or some barbs. For saltwater tanks, use damselfish. Don’t use feeder fish for your tank as they can introduce unwanted diseases in your tank. The initial cheap fish you put into the tank get the nitrogen cycle going and you can then add more delicate and expensive fish to your tank.

Use your test kit to determine the ammonia, nitrite and nitrate level in your tank and use this as a guide for how healthy your tank is. It takes time for the bacteria to develop unless you are using a EcoBio-Stone to speed up the nitrification process.

Poor pH can also be a cause of a loss of fish. The pH is a measure of how acidic or how alkaline a fish tank is. Ideally, the pH should be around 7.0, which is “neutral”. However, fish can generally tolerate pH of 5.5 to 8.0. You can get a test strip to measure the level and if you need to change it, look at ways to change the pH slowly.

If your water contains buffers, you will not be able to change the pH very easily. Remember, too, that fish can tolerate a wide range of pH levels but do not tolerate sudden changes in pH.  Sometimes it’s better to leave the pH alone as long as your fish are thriving.

If you still think you need to adjust the pH, one way to lower it slowly is to add some driftwood to your fish tank or to the tank. A cleaned off seashell or coral skeleton will gradually increase the pH of your aquarium. The downside of both these solutions is that they will stain the color of the water brown or yellow for quite a while, but it will alter the pH in a safe way.

Maintain your tank well and you can have a healthy, happy fish population.

Those who are new to the aquarium hobby are often surprised to learn that in order for the water in their tank to stay sparkling clear and their fish to stay healthy, bacteria in the water is vital. It seems almost backwards to them, as knowing the necessity of keeping the water clean for the best results, it seems odd that bacteria is an essential part of aquarium care.

When it is explained that these are the good bacteria, and that these tiny little microorganisms can clean the water and improve their environment, understanding dawns. Usually, once folks understand the process, they are eager to incorporate these bacteria in their aquarium water.

Unfortunately, that takes some time if you go about it the natural way. The ideal situation for aquarium water is one that mimics earth’s natural method at its best. In order for the water to reach that perfect stage in nature, it must go through quite the process, always teetering on the perilous edge of being unbalanced by some adverse happening along the way.

We have it easier in the world of aquaria. These friendly bacteria are what help a newly set up aquarium to cycle. We simulate nature by adding several small community fish to this newly established tank in order to start the cycle.
If possible, we also try to add some water or filter medium from an already established tank to seed the beneficial bacteria which ensure a successful cycle. The waste matter of the community fish creates ammonia for the bacteria to eat, and your bacteria (seeds) are going to contribute to helping good bacteria to become established.

After six to eight weeks of partial water changes and water tests for ammonia, nitrites, and nitrates, most aquarists would agree that the tank has totally cycled. Cloudy water can be a problem during the cycling period and beyond, and it can take some real tweaking to get the water quality just the way you want it to be.

All that can seem as if it takes an eternity, to someone who wants to be able to just sit back and enjoy his or her new aquarium. Nowadays, there is a much easier way to bring these beneficial bacteria into the tanks of aquarists everywhere. The EcoBio-Block family of products gets the nod from those who are new to the hobby of aquariums as well as those who have many years of experience with keeping fish.
These phenomenal rocks, which house a colony of beneficial bacteria which multiply and disperse about every 30 minutes, are made out of volcanic stone, which is known to be quite rich in minerals. These minerals are as good for the fish as they are for the friendly bacteria that this stone is infused with.

Using one of the EcoBio products, whether they are the EcoBio-Stones, EcoBio-Pebbles, or EcoBio-Rock, is the key to having crystal clear aquarium water without all of the maintenance work involved. Those who have experienced the difference that this product has made in the quality of their aquarium water and in the health of their fish recommend it highly.

Suffice it to say that Old Tank Syndrome is the opposite of New Tank Syndrome. To refresh the memory, let us remember that New Tank Syndrome takes place when an eager newcomer to the aquarium hobby starts to lose fish at about the six-week anniversary of aquarium ownership.

This can happen due to poor water quality, especially elevated ammonia levels because of an unhealthy filtration system. It can also take place because the novice owner is still a bit clumsy at giving the aquarium and fish the proper sort of care.

Old Tank Syndrome has a telltale symptom, and that is a sense of complacency in a long time aquarium owner when it comes to the condition of his or her tank. All of the excitement of having this hobby has passed by this time, and the fish-lover could almost be said to take his aquarium for granted.

The tank is stable, the fish are well fed and in good health. There have been no changes in the aquarium for quite a while now. The fish are fed on schedule most of the time, and no new fish have been added to the aqua community. No water tests for ammonia or nitrites have been done, either. All those partial water changes that were done at the beginning of aquarium ownership have fallen by the wayside as well.

It is about now that the long-time aquarium owner begins to notice that his fish tank seems to be a bit “off”. He or she may decide to do a partial water change to try and rectify things. Alternately, the hobbyist discovers a dead fish, and decides to go and purchase a few new occupants for the aquarium. Either of these scenarios is going to upset the balance of the aquarium.

The present fish are used to the aquarium condition just the way it is. A partial water change could prove to be very stressful, and could even kill the fish. Every seasoned pet fish keeper has heard this tale of woe from a newbie, “We had just changed the water, and then all the fish started to die one by one.”

New fish will also upset the balance in the aquarium, but in a different way. They will create even more ammonia and nitrites, and this will upset the balance that the fish have slowly become used to. Either way, you stand a good chance of losing some fish.

Old tank syndrome can be avoided by maintaining the same schedule of water testing and frequent partial water changes that you did when your tank was brand new. Or, you can take advantage of one of the EcoBio-Block family of products, and spend the time you would have spent maintaining your aquarium admiring your fish! EcoBio-Block Products will keep the water quality in your tank healthy for your fish population as well as maintaining the water in a crystal clear condition.

Initial conditioning of aquarium water, also known as “aquarium cycle,” can be one of the most stressful tasks in fish keeping. Oftentimes, when pet owners decide to add fishes to their extended family, they want to acquire the new pets right away, especially when they’ve visited the fish store and have fallen in love with some of the lovely creatures there. Conditioning a fish tank to make it suitable for the new fish — a process that normally takes weeks — could be a real test of patience.

Many new fish keepers make the mistake of taking shortcuts when cycling new aquariums. It’s a mistake quite easy to make because cycling involves the growth and proliferation of essential bacteria, which are invisible to the naked eye. Without a clear understanding of how cycling conditions the water into a healthy environment for fish, pet owners will tend to become impatient and cut corners along the aquarium cycle process, to the detriment of the fish.

The time frame that water conditioning follows depends on how fast beneficial bacteria are grown and colonized in the aquarium. Growth and colonization, in turn, depends on how much bacteria is introduced into the tank in the first place, and how much “food” is available with which the bacteria can continue to multiply. For the nitrosomonas bacteria, its food is ammonia, and for the nitrobacter, its food is the nitrites produced by the nitrosomonas.

In traditional cycling, a few hardy fishes are added to a newly setup tank to provide the ammonia to feed the nitrosomonas. This process normally takes several weeks to condition the water, not to mention the potential fish fatalities associated with the spikes in ammonia and nitrites during the process. Traditional cycling is stressful not only to the fish but to the owners as well.

In fishless cycling, on the other hand, household ammonia is used to treat a new tank to grow the bacteria. This method may spare the fish sacrifice, but diligence is required in regularly adding ammonia and closely monitoring water quality. The conditioning still takes several weeks, which can prove taxing especially when there’s nothing interesting to watch in the tank.

For fish keepers who don’t appreciate having to wait many weeks to cycle their aquarium, the solution is a highly rapid growth and proliferation of beneficial bacteria in the tank. The quickest ways to grow bacteria includes bringing in already prolific colonies from a healthy established aquarium, adding commercially available bacteria cultures to the tank, and/or putting a bacteria-multiplying product called EcoBio-Block in the habitat.

The EcoBio-Block Family Products are mineral-rich porous volcanic stones that are embedded with beneficial bacteria called “bacillus subtilis natto” from Japan, including the nutrients they need to proliferate. Once the EcoBio-Block is placed in water, the bacteria immediately come to life and multiply every half hour, performing the nitrification process associated with cycling and overall water conditioning. This special strain of bacteria effectively degrades organic matter and makes the tank clear, healthy, and odor-free for years.

With the fast-multiplying EcoBio-Block strain of bacillus subtilis natto, there’s no need to wait anxiously for many weeks before bringing fishes to their new home. Also, because of the continuous growth and proliferation of EcoBio-Block bacteria, maintaining ideal water conditions should henceforth be stress-free.