Aquarium and Pond Care with EcoBio-Block

Variety of aquarium filters

Many people are choosing to have aquariums with many different types of fish in them. Certainly, they are beautiful and relaxing to look at, but it takes some knowledge and work to ensure that your fish remain healthy and that your aquarium looks as good as you envision it will. One of the ways to ensure that it does is by choosing the best aquarium filter for your fish.

Even before deciding upon the filter, you need to decide what type of aquarium you will have. If this will be your first aquarium, it’s advisable that you start with a small aquarium first, as they are a little easier to maintain. Plus, you can always upgrade to a larger aquarium if the need and desire arise later.

Second, you need to carefully consider what filter will work best with your chosen aquarium. The filter is vital equipment, as it removes impurities from the water of your aquarium either via fine physical obstacles or via chemical processes. Choosing the right type of filter now can save you from hours of backbreaking maintenance work later on.

You should consider all three types of filters: biological, chemical, and mechanical.

Wet-dry filters actually employ all three types of filtration systems mentioned above, leading to less maintenance requirements than other types of filters. Wet-dry filters are more expensive, however, so they may not be the best choice for people who have an aquarium for the first time and/or are on a limited budget.

The three types of filters use different types of processes in order to eliminate the impurities in the water and to make the water cleaner and safer for your fish. Biological filters use bacteria to crack ammonia and nitrites.  Chemical filters use activated charcoal in order to eliminate unwanted dissolved wastes from the water. Mechanical filters use filtering particles and filter floss in order to remove impurities from the water.

If you choose to use a biological filter, it’s important to add the filter to the aquarium BEFORE you add the fish. You should also NOT add too many fish to the aquarium too soon, as the bacteria from the biological filter needs time to reduce the ammonia and nitrate levels. Too many fish in the water will cause the biological filter to work overtime, and the bacteria won’t be able to keep up with the increased demand, leading to high ammonia levels and the deaths of your fish.

You can help to make sure that there are enough bacteria in the water by using EcoBio-Block® products, which regularly adds nitrifying bacteria to new aquariums so that the water in your aquarium is safer and more beneficial for your fish. This will keep your water clear and healthy and reduce maintenance work.

One of the best choices of aquarium filters, especially for new and inexperienced aquarium owners, is an undergravel filter. This type of filter is inexpensive and totally keeps out debris from the aquarium. It also pulls water that is rich in oxygen through the gravel to help make the aquarium environment more livable for your fish.

One other type of filtration for you to consider is a sponge filter.  This filter is one that provides both mechanical and biological filtration. It has a large foam rubber (like a sponge) block that is connected to a lift tube or small power head. Water is drawn through the sponge to remove small particles from the water and to help grow bacteria that will keep your pond in great condition for your fish and plants.

Having your own aquarium tank can be a wonderful experience, as the beautiful fish can mesmerize you and your guests for hours. Maintaining the health of your aquarium does take some work, but by choosing the proper filter for your aquarium, you are well on your way to creating a hospitable and beneficial environment for your fish so that they can mesmerize you for hours on end.

Using an aquarium vacuum for partial water change

One of the first things a novice aquarium owner hears from fish-keeping friends and/or pet store personnel is the need for partial water changes of about 20 percent every few weeks, preferably on the same day of the week so as to have a set interval each time. This news may cause the new owner of an aquarium some apprehension, as they look at the size of their tank and try to figure out just how they are going to change the water without making a big mess.

You have tank owners who do this the hard way. They catch their fish, which can often take a while, and place them in a bucket already filled with water from the tank. Next, they dip out all the water by hand, using a bucket or some other container to do so. They then remove all of the wet, often smelly gravel by hand as well.

By the time the inside walls of the aquarium are spotless, the filter has been cleaned, the gravel rinsed clean, and the water replaced either by walking back and forth from the nearest faucet with a heavy bucket of water, splashing it here and there, or by pulling a garden hose inside, the typical aquarium owner is exhausted.

Other tank owners take a shortcut, which eliminates a good portion of the tank maintenance work. They make use of an aquarium vacuum when they take care of their partial water changes every 21 days or so. The typical aquarium vacuum attaches to a faucet indoors or out, and removes the water with the help of the water pressure from the faucet.

A tube is attached to one end of the aquarium vacuum, and can be pushed into deep gravel to suck out all the mulm waste and uneaten food, leaving cleaner gravel behind. Typically, the entire gravel bed is cleaned in this manner, then the filter medium is changed, and water is re-added to the aquarium.

There are some people who are new to the hobby of keeping fish that assume if taking 20 percent of the water out of the tank, then doing a partial water change of 50 percent or more would be even better. Unfortunately, these folks learn the hard way that removing too much water from an aquarium is not a good thing to do.

Aquarium water has a different chemistry after fish have lived in it for a period of time. Uneaten fish food and the waste products excreted by the fish cause these changes. The fish get used to the water chemistry. When too much of this ìlived inî water is removed, the fish cannot cope with the change, and become quite stressed. The weaker fish will die, often just a short time after they are placed back into the freshly cleaned aquarium. Hardier fish will live longer, perhaps for a few weeks or a couple of months before they also die.

Those uninitiated in fish keeping will swear that their partial water change killed their fish, and harbor the belief that doing partial water changes is not a good thing. They firmly believe that partial water changes should not be done at all if you want your fish to stay alive!

A much easier solution for solving the problem is to make use of the EcoBio-Block family of products. The EcoBio-Block is made from a distinctive type of volcanic rock that has been populated with live, friendly bacteria. These bacteria will grow and reproduce for a two-year period of time as they feed on the uneaten food and fish waste. This helps to keep the water crystal clear and free from odor, and makes frequent water changes unnecessary. You will have much more free time to enjoy the antics of your fish in your beautifully clean aquarium when you use an EcoBio-Block.