Aquarium and Pond Care with EcoBio-Block

One of the most common challenges of keeping an aquarium is cloudy water. Whether the cloudiness is green, white, or gray, a fish habitat that is short of crystal clear is not just an eyesore but also a serious health risk for its inhabitants. Why does the water turn cloudy and what can you do about it?

Grayish or dirty white water is often encountered when setting up a new tank. In most cases, a sand or gravel substrate that has not been diligently rinsed before setup will generate sufficient debris to fog the water. The only solution would be to re-rinse the substrate until all the debris is removed. An efficient mechanical filter will also help take care of minute floating particles.

Green water, which is oftentimes also thick and hazy, is caused by an “algae bloom” or the rapid growth of microscopic green algae. High and prolonged levels of bright light are the main causes of green algae growth and proliferation. If a tank gets direct sunlight or if the overhead lighting is left on for more than 10-12 hours a day, algae overgrowth becomes imminent. The simple solution is to locate the tank away from direct sunlight and attach a timer to the overhead lights so that the ideal light exposure cycles can be maintained.

Milky white water that sometimes gives off a rotten smell is caused by decay. Uneaten leftover food deteriorates and fouls up the water. An overstocked aquarium will render filtration systems and nitrifying bacteria inadequate to handle the bio-load. The result is pollution from rotting food and excess waste, making the water murky. In severe pollution situations, drastic water changes may be necessary.

Cloudy aquarium water caused by decaying food can be prevented by feeding only as much as the fish community can consume in three to five minutes. Leftover food should be scooped out.

Murky water caused by excess waste products can be prevented by maintaining a balanced tank with a population of fishes suitable for the size of the tank and the capacity of the filtration systems. This ensures that the filters and the colonies of beneficial bacteria can keep up with the bio-load of the community.

In effect, cloudy water can be minimized if adequate colonies of beneficial bacteria are present to break down the harmful ammonia and nitrites (from decaying food and excess waste matter) into less harmful nitrates. Experts have suggested adding gravel from established aquariums to supplement the insufficient bacterial colonies in a cloudy tank. One simple solution is to add an EcoBio-Block product to the tank.

The EcoBio-Block Family Products are mineral-rich porous volcanic stones from Japan embedded with prolific bacteria (“bacillus subtilis natto”) that can actively multiply every half hour. The bacteria establish colonies quickly, degrading organic matter and nitrifying waste products, and keeping the aquarium clear, odor-free and healthy for years.

Cloudy aquarium water, which causes stress to the fish community, should never have to happen. Feed just the right amount of food, keep a population of fish suitable to the tank size and filtration system, and add a bacteria enhancing product like EcoBio-Block, and you are assured of crystal clear water and healthy fishes all the time.

Copywright©2009 ONEdersave Products LLC

Aquarium Cycling Using EcoBio-Rock

Much of an aquarium’s success depends on the tank’s startup. Setting up a healthy freshwater fish habitat involves a complex process of bacterial growth and sustenance even before the tank’s intended inhabitants are introduced to their new home.

Aquarium cycling, or the process of cultivating beneficial bacteria that make the water quality ideal for the fishes, can be done in three different ways: fishless cycling using household ammonia, traditional cycling with “starter fish,” and infusion of “canned” live bacteria. The main objective is to grow large communities of two types of bacteria – one that converts toxic waste products or ammonia into less toxic nitrites, and one that converts nitrites into relatively non-toxic nitrates, which plants absorb as fertilizer. Sufficient beneficial bacteria ensure that the water quality remains ideal for healthy fishes.

In the fishless cycling method, initial bacteria are acquired from a healthy and stable aquarium. A small quantity of substrate, décor, filter media, or plants from long-established setups is introduced to a newly assembled tank, then a regimen of regular treatments of household ammonia feeds the bacteria until water testing results reach the desired stable level. This method normally takes several weeks depending on how quickly the bacteria multiply. Fish are introduced only after the tank has stabilized.

Traditional cycling involves the use of starter fish, which are usually hardy species like tetras, danios, and some livebearers. The waste products of the starter fishes feed and cultivate the beneficial bacteria. More fishes are added a few at a time until a growing community of bacteria is able to sustain a stable water quality for the intended inhabitants of the tank. Similar to fishless cycling, traditional cycling can take several weeks to stabilize, with some of the starter fishes failing to survive the stressful cycling period.

Cycling with “canned” bacteria is a method that relies on commercially prepared bacterial cultures. These cultures are marketed specifically for cycling aquariums, some claiming to make a tank ready for its intended inhabitants within several hours. As with other cycling methods, regular water testing must be conducted to monitor spikes in ammonia or nitrites, which are best addressed by partial water changes or additional infusion of the bacterial culture.

Undoubtedly, ideal water conditions depend on the community of beneficial bacteria in the tank. One type of beneficial bacteria that has been used extensively in water conditioning is bacillus subtilis natto. Uniquely cultured in Japan, the bacteria degrade ammonia and nitrites into safer nitrates, keeping the water clear and odor-free. Bacillus subtilis natto is currently used only in EcoBio-Block products, which are mineral-rich porous volcanic stones that disperse these fast-propagating bacteria regularly into the water, keeping the levels of beneficial bacteria consistently high. EcoBio-Block products aid in cycling and remain effective in maintaining ideal water conditions for approximately two years.

Whatever cycling option is preferred, as long as beneficial bacteria are prolific and actively breaking down toxic elements in the water, the aquarium will remain a healthy environment for the fish.

Copyright©2009 ONEdersave Products LLC