There can be a lot of reasons why your fish are dying. Generally, it happens when a fish tank is new. It pays to buy an aquarium water test kit to determine how much ammonia, nitrites and nitrates are in the aquarium, and how high or low the pH is. These are the four most important tests for your tank.

In the nitrogen cycle of the fish tank, an important biological cycle, the fish give off nitrogenous wastes when they eliminate and these products break down into ammonia, which is very toxic to most fishes. In aquariums, this nitrogen product can build up into levels that are harmful to your fish. When you measure the ammonia level, it should be negligible.

The nitrogen cycle, is the process of getting rid of ammonia using nitrifying bacteria that convert the ammonia to nitrite and then to nitrate, which is not as hazardous. The cycle goes from ammonia to nitrite to nitrate. These bacteria are present everywhere and establish themselves eventually in your fish tank as soon as the ammonia builds up. It is a slow process, however, and you can lose fish in the meantime.

One way of improving the nitrogen status of your aquarium is to purchase an EcoBio-Block Products that contains the nitrifying bacteria within the block. You rinse the block and soak it in chlorine free water over night before placing it in your tank. Normally, in a few weeks or so, you can have your ammonia levels drop followed by drops in nitrite levels. You can safely put your fish in then and expect that they will survive.

The other thing is to take a couple of hardy and cheap fish and put them in your tank. Don’t overfeed the fish. More food means that more ammonia will build up. For freshwater fish, try some zebra danios or some barbs. For saltwater tanks, use damselfish. Don’t use feeder fish for your tank as they can introduce unwanted diseases in your tank. The initial cheap fish you put into the tank get the nitrogen cycle going and you can then add more delicate and expensive fish to your tank.

Use your test kit to determine the ammonia, nitrite and nitrate level in your tank and use this as a guide for how healthy your tank is. It takes time for the bacteria to develop unless you are using a EcoBio-Stone to speed up the nitrification process.

Poor pH can also be a cause of a loss of fish. The pH is a measure of how acidic or how alkaline a fish tank is. Ideally, the pH should be around 7.0, which is “neutral”. However, fish can generally tolerate pH of 5.5 to 8.0. You can get a test strip to measure the level and if you need to change it, look at ways to change the pH slowly.

If your water contains buffers, you will not be able to change the pH very easily. Remember, too, that fish can tolerate a wide range of pH levels but do not tolerate sudden changes in pH.  Sometimes it’s better to leave the pH alone as long as your fish are thriving.

If you still think you need to adjust the pH, one way to lower it slowly is to add some driftwood to your fish tank or to the tank. A cleaned off seashell or coral skeleton will gradually increase the pH of your aquarium. The downside of both these solutions is that they will stain the color of the water brown or yellow for quite a while, but it will alter the pH in a safe way.

Maintain your tank well and you can have a healthy, happy fish population.

When it is explained that these are the good bacteria, and that these tiny little microorganisms can clean the water and improve their environment, understanding dawns. Usually, once folks understand the process, they are eager to incorporate these bacteria in their aquarium water.

Unfortunately, that takes some time if you go about it the natural way. The ideal situation for aquarium water is one that mimics earth’s natural method at its best. In order for the water to reach that perfect stage in nature, it must go through quite the process, always teetering on the perilous edge of being unbalanced by some adverse happening along the way.

We have it easier in the world of aquaria. These friendly bacteria are what help a newly set up aquarium to cycle. We simulate nature by adding several small community fish to this newly established tank in order to start the cycle.
If possible, we also try to add some water or filter medium from an already established tank to seed the beneficial bacteria which ensure a successful cycle. The waste matter of the community fish creates ammonia for the bacteria to eat, and your bacteria (seeds) are going to contribute to helping good bacteria to become established.

After six to eight weeks of partial water changes and water tests for ammonia, nitrites, and nitrates, most aquarists would agree that the tank has totally cycled. Cloudy water can be a problem during the cycling period and beyond, and it can take some real tweaking to get the water quality just the way you want it to be.

All that can seem as if it takes an eternity, to someone who wants to be able to just sit back and enjoy his or her new aquarium. Nowadays, there is a much easier way to bring these beneficial bacteria into the tanks of aquarists everywhere. The EcoBio-Block family of products gets the nod from those who are new to the hobby of aquariums as well as those who have many years of experience with keeping fish.
These phenomenal rocks, which house a colony of beneficial bacteria which multiply and disperse about every 30 minutes, are made out of volcanic stone, which is known to be quite rich in minerals. These minerals are as good for the fish as they are for the friendly bacteria that this stone is infused with.

Using one of the EcoBio products, whether they are the EcoBio-Stones, EcoBio-Pebbles, or EcoBio-Rock, is the key to having crystal clear aquarium water without all of the maintenance work involved. Those who have experienced the difference that this product has made in the quality of their aquarium water and in the health of their fish recommend it highly.

Many new fish keepers make the mistake of taking shortcuts when cycling new aquariums. It’s a mistake quite easy to make because cycling involves the growth and proliferation of essential bacteria, which are invisible to the naked eye. Without a clear understanding of how cycling conditions the water into a healthy environment for fish, pet owners will tend to become impatient and cut corners along the aquarium cycle process, to the detriment of the fish.

The time frame that water conditioning follows depends on how fast beneficial bacteria are grown and colonized in the aquarium. Growth and colonization, in turn, depends on how much bacteria is introduced into the tank in the first place, and how much “food” is available with which the bacteria can continue to multiply. For the nitrosomonas bacteria, its food is ammonia, and for the nitrobacter, its food is the nitrites produced by the nitrosomonas.

In traditional cycling, a few hardy fishes are added to a newly setup tank to provide the ammonia to feed the nitrosomonas. This process normally takes several weeks to condition the water, not to mention the potential fish fatalities associated with the spikes in ammonia and nitrites during the process. Traditional cycling is stressful not only to the fish but to the owners as well.

In fishless cycling, on the other hand, household ammonia is used to treat a new tank to grow the bacteria. This method may spare the fish sacrifice, but diligence is required in regularly adding ammonia and closely monitoring water quality. The conditioning still takes several weeks, which can prove taxing especially when there’s nothing interesting to watch in the tank.

For fish keepers who don’t appreciate having to wait many weeks to cycle their aquarium, the solution is a highly rapid growth and proliferation of beneficial bacteria in the tank. The quickest ways to grow bacteria includes bringing in already prolific colonies from a healthy established aquarium, adding commercially available bacteria cultures to the tank, and/or putting a bacteria-multiplying product called EcoBio-Block in the habitat.

The EcoBio-Block Family Products are mineral-rich porous volcanic stones that are embedded with beneficial bacteria called “bacillus subtilis natto” from Japan, including the nutrients they need to proliferate. Once the EcoBio-Block is placed in water, the bacteria immediately come to life and multiply every half hour, performing the nitrification process associated with cycling and overall water conditioning. This special strain of bacteria effectively degrades organic matter and makes the tank clear, healthy, and odor-free for years.

With the fast-multiplying EcoBio-Block strain of bacillus subtilis natto, there’s no need to wait anxiously for many weeks before bringing fishes to their new home. Also, because of the continuous growth and proliferation of EcoBio-Block bacteria, maintaining ideal water conditions should henceforth be stress-free.